Moxon 6M Antenna

I have been working on building a Moxon antenna for 6 meters.  I am using the similar design style as K3NG antenna (http://blog.radioartisan.com/homebrew-lightweight-6-meter-moxon/)  with some minor differences.

Like K3NG’s antenna, the poles are made from snow plow marking poles.  I put super-glued spacers on the ends with holes to allow the wire to pass through.  I then bent the poles upward so that  the wire so that the wire tension is always maintained and at the measured distances based upon the Moxon calculator was obtained.

(http://www.moxonantennaproject.com/design.htm)

Moxom_6mtr_ant

 

moxon_1 moxon_2

Comments are closed.